Table of Contents
It might seem like 3D printing is a thoroughly modern technology, but the fact is, it’s been used in the industry for decades. The only thing that’s really new is that the printers have become cheap and small enough for folks like us to buy one and plop it on our workbench. So why not take advantage of all that knowledge accumulated by those who’ve been working in the 3D printing field, more accurately referred to as additive manufacturing, since before MakerBot stopped making wooden printers?
That’s why we asked Eric Utley, an applications engineer with Protolabs
That’s why we asked Eric Utley, an applications engineer with Protolabs, to stop by the Hack Chat this week. With over 15 years of experience in additive manufacturing, it’s fair to say he’s seen the technology go through some pretty big changes. Hes worked on everything from the classic stereolithography (SLA) to the newer Multi Jet Fusion (MJF) printers, with a recent focus on printing in metals such as Inconel and aluminum. Compared to the sort of 3D printers he’s worked with, we’re basically playing with hot, semi-melted, LEGOs — but that doesn’t mean some of the lessons he’s learned can’t be applied at the hobbyist level.
The Chat started off with questions about what Eric’s day-to-day looks like, and what kind of awesome machines he gets to play with. After all not many of us will get access to a printer that can spit out something the size of a car engine, so we’ve got to live vicariously through others more fortunate than ourselves. This lead to something of a primer about the different printing technologies currently in use by the “Big Boys” for both plastic and metal parts.
Rather than fused deposition modeling (FDM)
Rather than fused deposition modeling (FDM), the process by which our desktop printers work, Eric says most of the time he’s dealing with some form of sintering. There’s several reasons for this, but one of the major ones is speed. Since there’s no time penalty for printing multiple objects, they can load the entire print surface up and maximize their efficiency. In one case Eric recalls they ran off 3,000 individual parts in a single 48 hour print.
Eventually the discussion moved on to the actual design of parts destined for a 3D printer, which is where things were arguably the most applicable for home gamers. Eric mentioned that sintering and jet fusion printing doesn’t require supports, as the powdered plastic itself provides a sort of scaffolding for the part as it’s being built up. But even if the part is being produced with a technology that would require support material, good designers try to avoid it as much as possible. Especially in the medical and aerospace fields, where internal supports could pose problems. As it turns out the rules here are pretty similar to what those of us with desktop machines are used to, such as making sure to keep angles steeper than 45°, and using chamfers in place of hard edges.
Interestingly, Eric says one of the biggest problems they have is with wall thickness. Obviously there’s a minimal wall thickness for each different combination of material and printing technology, but more than that, he says rapidly varying the wall thickness of a printed metal part can lead to differential shrinkage which can compromise the whole part. If you can’t use a consistent wall thickness through your design, his recommendation is to make the transitions as gradual as possible, for example by using fillets.
It was also somewhat comforting to hear that, even with high-end industrial 3D printers, there are still dimensional accuracy issues to contend with. Case in point: holes on the side of objects. Eric says openings on the top and bottom aren’t so much of a problem since they’re essentially a stack of two-dimensional shapes, but once you have the a hole on the side of the object, the layer height of the print adds a new variable. The problem is serious enough that, if a part needs holes on the side, it will often be handled in an additional processing step: plastic parts will have the holes drilled after printing, and metal ones will have the openings machined to the proper tolerances. Just like at home!
In fact, for metal parts, there’s usually a fair amount of machining required after they come off the printer. Eric says that even in the best case, they shoot for a metal part to be 95% complete when the print is done. From there, it almost always needs a trip to the machine shop to be cleaned up. But he also says this isn’t really a quirk limited to 3D printing, and that cast metal components often need a similar level of post-processing to get the details right. As a side-effect, he notes that those who have experience designing parts for casting tend to do well when switching over to additive manufacturing.
We’d like to thank Eric for taking the time to join us this week in the Hack Chat. While we might never get to work on the class of machines at his disposal, we enjoyed hearing about the little details they have in common with our far more simplistic desktop printers — there’s a certain satisfaction in knowing even the pros occasionally struggle with the same issues we do.
The Hack Chat is a weekly online chat session hosted by leading experts from all corners of the hardware hacking universe. It’s a great way for hackers connect in a fun and informal way, but if you can’t make it live, these overview posts as well as the transcripts posted to Hackaday.io make sure you don’t miss out.